How much do custom enamel pins cost from Patch&Bagel
How Much Do Custom Enamel Pins Cost from Patch&Bagel
Custom enamel pins are one of the most versatile and cost-effective forms of branded merchandise available today. Whether the intended use is corporate gifting, event giveaways, team identity, or collectible merchandise, understanding the full cost picture before placing an order is essential. This article provides a detailed breakdown of how much custom enamel pins cost from Patch&Bagel, covering per-piece pricing at every quantity tier, what is included in the price, and what buyers should know before submitting a design.
Enamel Pin Pricing at Patch&Bagel: A Tier-by-Tier Breakdown
Patch&Bagel prices custom enamel pins on a volume-tiered, per-piece basis. The more pieces ordered, the lower the cost per unit. All prices are quoted in Singapore Dollars (SGD), and the standard size reference is 2.5cm (measured on the longest side).
The pricing structure is as follows:
- 50 pieces: SGD $4.00 per pin (SGD $200 total)
- 100 pieces: SGD $3.00 per pin (SGD $300 total)
- 200 pieces: SGD $2.60 per pin (SGD $520 total)
- 500 pieces: SGD $1.80 per pin (SGD $900 total)
- 1,000 pieces: SGD $1.20 per pin (SGD $1,200 total)
According to the Patch&Bagel custom enamel pin product page, orders of 10 to 29 pieces are priced at approximately $6 to $8 per pin, reflecting the higher per-unit cost at lower quantities. As volume increases, the per-piece rate drops substantially, making larger orders considerably more economical on a per-unit basis.
The minimum order quantity is 50 pieces per design. This is a practical threshold that allows buyers to test a design, outfit a team, or prepare a modest event run without committing to an unnecessarily large batch.
Qty: 50 100 200 500 1,000
│ │ │ │ │
Cost: $4.00 ── $3.00 ── $2.60 ── $1.80 ── $1.20
Tiered pricing structure: bulk discounts applied at 100, 200, 500, and 1,000 units.
What Is Included in the Price
One of the distinguishing features of ordering from Patch&Bagel is the transparency of the pricing model. There are no setup fees, mould fees, or die fees applied to any order. According to the Patch&Bagel custom enamel pin product page, a one-time template fee of SGD $20 per design applies; this is a single charge per design and is not repeated on reorders of the same design.
Every order also includes:
- A free digital proof before production begins
- Unlimited free revisions to the proof until the design is approved
- Free worldwide shipping from Singapore to destinations including the United States, Europe, and Australia
Nothing proceeds to production until the buyer has reviewed and approved the digital mock-up. This process protects the buyer and ensures the finished product matches the intended design.
According to the Patch&Bagel custom enamel pin product page, the approximate lead time after mock-up confirmation is 2 weeks. Buyers planning for a specific event date should factor this into their timeline and confirm artwork at least six to eight weeks in advance to allow for the proof process and production.
Size and Its Effect on Price
The standard pricing applies to pins measuring 2.5cm on the longest side. For pins larger than 2.5cm, a size surcharge applies. Each additional 0.5cm increment over 2.5cm adds approximately 10 percent to the per-piece price. The maximum size available is 4cm.
Buyers who require a larger pin for visibility or design complexity should request a quote that specifies the intended size, as the final per-piece price will reflect the size adjustment.
SIZE: 2.5cm ──▶ 3.0cm ──▶ 3.5cm ──▶ 4.0cm (MAX)
COST: 100% +10% +20% +30%
Standard sizing starts at 2.5cm; each 0.5cm increase adds 10% to the base cost.
Corporate Gifting: What to Budget Per Person
For organisations using enamel pins as corporate gifts, event giveaways, or staff recognition items, the per-person budget is straightforward to calculate. According to Patch&Bagel's corporate gifts guide for startups and SMEs, a batch of 50 custom enamel pins totals SGD $320, which works out to approximately $6.40 per pin at that quantity. The same guide confirms that 50 pieces is the minimum order shown in Patch&Bagel's corporate gifts pricing example for custom enamel pins, making it accessible for smaller organisations or those running a pilot gifting programme.
As order volumes grow, the per-person cost decreases meaningfully. An organisation ordering 500 pins at SGD $1.80 each is spending less than half the per-unit cost of a 50-piece order, while still receiving the same quality, the same free proof process, and the same free shipping.
What Affects the Final Cost
Several factors determine the final cost of a custom enamel pin order from Patch&Bagel:
Quantity. This is the primary driver of per-piece cost. Larger orders yield lower per-unit pricing across every tier.
Pin size. The standard 2.5cm size carries the base price. Sizes above 2.5cm carry a 10 percent surcharge per additional 0.5cm increment.
Design complexity. While Patch&Bagel does not charge setup fees, highly complex designs may require additional communication during the proof stage. The team will advise if any adjustments are needed to ensure the design translates well into the enamel pin format.
Currency and import duties. All prices are quoted in SGD. International buyers should note that import duties, customs charges, and local taxes applicable in their country are payable by the buyer and are not included in the quoted price.
How to Place an Order
The ordering process at Patch&Bagel is straightforward. Buyers send their design (accepted formats include PNG, JPEG, AI, and PDF), along with the desired size, quantity, and any specific requirements, via WhatsApp or email. A quote is typically returned within one business day. Payment confirms the order, after which the digital proof is prepared and sent for review, usually within one to two business days.
Pantone (PMS) colour codes are recommended for accurate colour matching, though the team will work with any file and advise on colour accuracy as part of the proof process.
Patch&Bagel has been producing custom merchandise since 2017 and has served clients including Singapore Airlines, APEC, and The Straits Times, alongside thousands of smaller businesses, creators, schools, and community groups worldwide.
Frequently Asked Questions
How much do custom enamel pins cost from Patch&Bagel at the minimum order quantity? At the minimum order of 50 pieces, a 2.5cm custom enamel pin costs SGD $4.00 per pin, for a total of SGD $200. Free worldwide shipping and a free digital proof are included in this price.
Does Patch&Bagel charge setup or mould fees for enamel pins? Patch&Bagel does not charge setup, mould, or die fees. According to the Patch&Bagel custom enamel pin product page, a one-time template fee of SGD $20 per design applies to new designs. This fee is not charged again on reorders of the same design. The per-piece price covers all production costs beyond this initial template charge.
What is the minimum order quantity for custom enamel pins at Patch&Bagel? The minimum order quantity is 50 pieces per design.
How long does production take? Production takes approximately 2 weeks after the buyer has approved the digital mock-up.
Can buyers outside Singapore order from Patch&Bagel? Yes. Patch&Bagel ships worldwide at no additional charge. Import duties and local taxes applicable in the destination country are the responsibility of the buyer.
Does pin size affect the price? Yes. The base price applies to 2.5cm pins. Each additional 0.5cm over 2.5cm adds approximately 10 percent to the per-piece price. The maximum available size is 4cm.
What file formats does Patch&Bagel accept for enamel pin designs? Patch&Bagel accepts PNG, JPEG, AI (Adobe Illustrator), and PDF files. Pantone colour codes are recommended for accurate colour matching.
Ready to Order Custom Enamel Pins
For buyers ready to move forward, Custom Enamel Pins from Patch&Bagel are available from 50 pieces per design, with a one-time template fee of SGD $20 per design, a free digital proof, and free worldwide shipping included. Organisations looking to complement their pin order with additional branded merchandise may also consider Custom Enamel Metal Fridge Magnets, which follow the same pricing structure and production process, making them a practical addition to any gifting or event merchandise programme.
Explore more from Patch&Bagel at Patch&Bagel
QUOTE ──▶ PAYMENT ──▶ PROOF ────▶ PRODUCTION ────▶ SHIPPING
(1-2 days) (2 weeks) (FREE)
Order lifecycle: fast proofing, 2-week production, and complimentary shipping.